STT280 Sealed Tilt Sensor
NOTE: STT280 is now a discontinued and is unavailable. Please refer to VTS Series for alternate product solutions.
The STT280 sealed tilt sensor is designed to provide reliable, fit-and-forget tilt measurement sensing within an extremely compact housing, for the most arduous operating environments. The STT280 is suitable for use in applications such as road construction equipment, cranes and booms, scissor lifts, agricultural vehicles, container handling and hydraulic lift systems.
- No moving parts
- High resolution ±0.07°
- Absolute measurement
- Measuring ranges ±10°, ±20°, ±30° and ±60°
- Less than 6.5mA supply current
- Crush-proof mounting flange
- Rugged construction, sealed to IP68
TheSTT280 uses solid-state, 3D-MEMS (Micro-Electro-Mechanical Systems) technology to measure the sensor’s inclination relative to earth’s gravity. The STT280 has a choice of measurement ranges from ±10°, ±20°, ±30° and ±60° and provides a 0.5 to 4.5Vdc output signal over this range, with a nominal 2.5Vdc at 0° tilt. By using this technology, the STT280 provides distinct advantages in reliability, stability and compactness over fluid based, electrolytic and pendulum operated sensors.
The STT280 can operate from a 5Vdc regulated or 8-30Vdc unregulated supply.
Related Products
-
The SRH301 and SRH302 range of shaft-operated Rotary Position Sensors offers the optimal combination of performance, safety and cost.
- Non-contacting Hall-effect t...
SRH301 & SRH302 Rotary Position Sensor
The SRH301 and SRH302 range of shaft-operated Rotary Position Sensors offers the optimal combination of performance, safety and cost. Non-contacting…
- Non-contacting Hall-effect t...
-
The Gill WearDetect (4212) Oil Debris Sensor offers 4 types of measurement outputs and with no specialist knowledge required to analyse the outputs, the sensor offers a low co...
WearDetect Oil Debris Sensor
The Gill WearDetect (4212) Oil Debris Sensor offers 4 types of measurement outputs and with no specialist knowledge required to…
-
Intrinsically safe G603 is CSA approved for use in potentially explosive gas/vapour atmospheres. The G603 is designed for industrial and scientific feedback applications and i...
G603 Large Angle Tilt Sensor
Intrinsically safe G603 is CSA approved for use in potentially explosive gas/vapour atmospheres. The G603 is designed for industrial and…
-
The 350bar S623 tilt sensor is an affordable, durable, high-accuracy sensor designed for underwater marine and offshore applications. The S623, like all Positek® sensors, is ...
S623 Submersible Large Angle Tilt Sensor
The 350bar S623 tilt sensor is an affordable, durable, high-accuracy sensor designed for underwater marine and offshore applications. The S623,…
-
The SRH301 and SRH302 range of shaft-operated Rotary Position Sensors offers the optimal combination of performance, safety and cost.
- Non-contacting Hall-effect t...
SRH301 & SRH302 Rotary Position Sensor
The SRH301 and SRH302 range of shaft-operated Rotary Position Sensors offers the optimal combination of performance, safety and cost. Non-contacting…
- Non-contacting Hall-effect t...
-
The Gill WearDetect (4212) Oil Debris Sensor offers 4 types of measurement outputs and with no specialist knowledge required to analyse the outputs, the sensor offers a low co...
WearDetect Oil Debris Sensor
The Gill WearDetect (4212) Oil Debris Sensor offers 4 types of measurement outputs and with no specialist knowledge required to…
-
Intrinsically safe G603 is CSA approved for use in potentially explosive gas/vapour atmospheres. The G603 is designed for industrial and scientific feedback applications and i...
G603 Large Angle Tilt Sensor
Intrinsically safe G603 is CSA approved for use in potentially explosive gas/vapour atmospheres. The G603 is designed for industrial and…
-
The 350bar S623 tilt sensor is an affordable, durable, high-accuracy sensor designed for underwater marine and offshore applications. The S623, like all Positek® sensors, is ...
S623 Submersible Large Angle Tilt Sensor
The 350bar S623 tilt sensor is an affordable, durable, high-accuracy sensor designed for underwater marine and offshore applications. The S623,…
-
The SRH301 and SRH302 range of shaft-operated Rotary Position Sensors offers the optimal combination of performance, safety and cost.
- Non-contacting Hall-effect t...
SRH301 & SRH302 Rotary Position Sensor
The SRH301 and SRH302 range of shaft-operated Rotary Position Sensors offers the optimal combination of performance, safety and cost. Non-contacting…
- Non-contacting Hall-effect t...
-
The Gill WearDetect (4212) Oil Debris Sensor offers 4 types of measurement outputs and with no specialist knowledge required to analyse the outputs, the sensor offers a low co...
WearDetect Oil Debris Sensor
The Gill WearDetect (4212) Oil Debris Sensor offers 4 types of measurement outputs and with no specialist knowledge required to…
-
Intrinsically safe G603 is CSA approved for use in potentially explosive gas/vapour atmospheres. The G603 is designed for industrial and scientific feedback applications and i...
G603 Large Angle Tilt Sensor
Intrinsically safe G603 is CSA approved for use in potentially explosive gas/vapour atmospheres. The G603 is designed for industrial and…
-
The 350bar S623 tilt sensor is an affordable, durable, high-accuracy sensor designed for underwater marine and offshore applications. The S623, like all Positek® sensors, is ...
S623 Submersible Large Angle Tilt Sensor
The 350bar S623 tilt sensor is an affordable, durable, high-accuracy sensor designed for underwater marine and offshore applications. The S623,…
Manufacturer
