Description
Seika SBL1 Sensor box for use in particularly harsh operating conditions containing one sensor and one signal conditioner with 4…20mA, 2-wire output.
The SBL1 is a large, pressure die cast aluminium housing (IP65) with an integrated sensor for uniaxial inclination measurements.
In addition to the sensor, the box contains a signal conditioner with a 4…20mA, 2-wire output and a separate, highly stable supply voltage for the actual sensor feeding off the current loop. Furthermore, the signal conditioner includes an active low pass filter, whose upper cut-off frequency / settling time can be adjusted to suit the measurement task, an output stage with current limitation, noise voltage filters and a diode bridge for unipolar connection to the current loop. Interference signals caused by unwanted ground currents are eliminated by electrically isolating sensor and signal conditioner from the housing.
Unlike the SB2.., the SBL1 can accommodate larger inclinometers, such as the NG.. series, that have a higher measuring accuracy. A special electronic temperature compensation system can significantly reduce the temperature sensitivity of the implemented sensor.
The compact PG cable gland and compact housing size in combination with the 2-wire connection enable the use of this high quality measuring system in harsh operating conditions.
- Large, robust pressure die cast aluminium housing (IP65)
- Angular adjustable, vibration damped 3 point fastening of rigid, 3.2mm thick case PCB
- Integrated signal conditioner with 4-20mA, 2-wire output
- Temperature drift compensation
- No separate supply voltage necessary
- All SEIKA sensors fit the housing and can be installed in different directions of operation
- Output signal calibrated to customer’s specifications
- Sensor and signal conditioner electrically isolated form housing
- extensive EMC protection
- Highly stable sensor supply voltage
- Loop current limitation
- High mechanical overload resistance
- Either connection polarity
- Low pass filter with optional choice of cut-off frequency for suppression of interference frequencies
SEIKA develops, manufactures and distributes sensors for measurement of physical quantities and electronic and mechanical accessories for sensors. Inclinometers for nearly all existing tilt measurements and a series of robust accelerometers with integrated sensor electronics are SEIKA’s standard products. Next to these, SEIKA also manufactures a number of customer specific sensors.
Next to these standard products, Seika also manufactures level and humidity sensors for special applications as well as electronic components and sensor accessories.
For the full range of Seika products
Follow us on Facebook
