IP Series Momentary Push Button

APEM IP Series Illuminated or non-illuminated momentary action push buttons for harsh environments, sealed to IP67 and IP69K (non-illuminated models). Round or square actuator, available in many different colours. Numerous terminal options, gold-plated silver contacts.

MAIN FEATURES

  • Normally open (NO) or NC/NO combined (non-illuminated only)
  • Variety of terminal options
  • Flat round actuator for optional marking
  • High brightness illumination
  • Tin plated LED terminals
  • Operating temperature: -40 °C to +85 °C (-40 °F to 185 °F)

ADDITIONAL SEALING

  • For ROUND plungers only, illuminated or non-illuminated
  • By silicone boot for protection against frost and abrasion by sand. Order separately.
    • transparent: U5125
    • blue: U5125-1
    • black: U5125-2
    • red: U5125-6

NOTE: Latching version also available.

 

 

Description

APEM IP Series Illuminated or non-illuminated momentary action push button for harsh environments, sealed to IP67 and IP69K (non-illuminated models). Round or square actuator, available in many different colours. Numerous terminal options, gold-plated silver contacts.

MAIN FEATURES of the IP Series Momentary Push Button:

  • Normally open (NO) or NC/NO combined (non-illuminated only)
  • Variety of terminal options
  • Flat round actuator for optional marking
  • High brightness illumination
  • Tin plated LED terminals
  • Operating temperature: -40 °C to +85 °C (-40 °F to 185 °F)

ADDITIONAL SEALING

  • For ROUND plungers only, illuminated or non-illuminated
  • By silicone boot for protection against frost and abrasion by sand. Order separately.
    • transparent: U5125
    • blue: U5125-1
    • black: U5125-2
    • red: U5125-6

NOTE: Latching version also available.

Control Devices is the official APEM distributor for Australia and New Zealand. APEM offers a broad selection of quality products with proven effectiveness in harsh environments. From Push buttons, Rockers, Toggles, LED indicators, Emergency Stops to Joysticks and keypads.

APEM develops and manufactures professional switch products for diversified markets including instrumentation, medical, communications, industrial automation, defence and transport. With a vertically integrated production, and controls all stages of product development and production: from tooling, moulding, screw machining to assembly and final inspection.

APEM’s dedication and experienced teams can respond to the most complex requirements. This technical expertise ensures the continuous growth of our product ranges, allowing strong partnerships with our customers and providing the necessary flexibility to create an infinite number of products.

APEM offers a range of more than 50,000 customisable part numbers: colour, marking, finish, shape and dimensions… unlimited combinations are possible. This variety of components allows them to create the unique combination to match your design. Custom colours, specific materials, special backlighting or varied shapes are available upon request. Particular attention is paid to the cosmetic appearances of our products to best match your requirements, from specific markings to brightness illumination for outdoor applications.

By controlling all phases of manufacturing and quality control, APEM products offer the ability to withstand the adverse elements associated with harsh environments, without affecting their life expectancy.

See all APEM Products

Follow us on Facebook

• Max. current/voltage rating with resistive load (gold plated silver contacts):
5A 28VDC, 70,000 cycles
0.2A 48VDC, 500,000 cycles
0.5A 48VAC, 500,000 cycles
• Initial contact resistance: 100 mΩ max.
• Insulation resistance: 1 GΩ min. at 500VDC
• Dielectric strength: 1,500 Vrms
• Contact bounce: 10 ms

• Panel thickness: 1.5 mm (.059) min. , 4 mm (.157 max.)
• Total travel:
Function 3: 1.7 mm (.067) +/- 0.3 mm
Function 5: 1.3 mm (.051) +/- 0.3 mm
• Typical operating force : 6N +/- 2N
• Low level/mechanical life: 1,000,000 cycles
• Torque: 1.5 Nm max. applied to nut
• Soldering: 320°C max. for 3 sec.

ENVIRONMENTAL SPECIFICATIONS
• Front panel sealing: IP67 according to IEC 60529, IP69K according to DIN 40050-9 (non-illuminated) with cap U5125
• Shock resistance: 100 g according to IEC 512-4, test 6c
• Vibration resistance: 10-500Hz - 10 g according to IEC 512-4, test 6d
• Salt spray: IEC 512-6, test 11f
• Robustness (non-illuminated): IK06 according to EN 50102 (1 joule)
• Operating temperature: -40°C to +85°C
(-40°F to 185°F)

MATERIALS
• Case: thermoplastic UL94-V0
• Actuator: polyamide 6/6
• Bushing/bezel: zinc die-cast
(zamak), black painted
• Contacts: silver, gold plated (std)
brass, gold plated (for option 104)
• Output wires (flying lead terminals):
F version: AWG20, section 0.6 mm2
W version: AWG24, section 0.23 mm2
• LED wires:
F version: AWG26, section 0.12 mm2
W version: AWG24, section 0.23 mm2
• Lens: polycarbonate
• Terminal seal: epoxy

Content missing