Ditel KOS517A Universal 2-way isolator for DC voltage or current signals. It admits input from mV to high VDC voltages with ± values, as well as current 0/4-20mA, being able ...
LOOP ISOLATOR For DIN Rail Input: 4-20 mA Output: 4-20 mA Isolation: 3 ways, 2.5 kV Power supply: 24 AC/DC…
Ditel KOS538A Loop isolator for DIN rail. It has an input :0/4-20mA (source/sink) and Output: 0/4-20mA (Source). Isolation: 3 ways 3kV. Power supply of 24V DC.
Ditel KOS538A Loop isolator for DIN rail. It has an input :0/4-20mA (source/sink) and Output: 0/4-20mA (Source). Isolation: 3 ways…
Ditel KOS538A-Dual Isolator double loop isolator for DIN rail. Has two input 0/4-20mA (Source/sink), two output 0/4-20mA (Source). Isolation: 3-way 3kV/ 3.5kV between ch1 and ...
Ditel KOS817A Temperature Converter - converts the temperature captured by a 2 or 3-wire Pt100 sensor, into a proportional voltage and current output signal (Active/Passive).
...
Temperature Converter for DIN Rail Input: Pt100 (2 or 3 wires) Output: 0-10V; 0/4-20 mA Isolation: 2 ways 2.5 kV…
Ditel KOS819A Transmitter with 4-20mA output for 2-3-4 wire Pt100, Pt1000 and Ni100 sensors, for temperature measurement in industrial environments, with excellent EMC charact...
Ditel KOS819A Transmitter with 4-20mA output for 2-3-4 wire Pt100, Pt1000 and Ni100 sensors, for temperature measurement in industrial environments,…
Ditel KOS819B Temperature Converter - converter of the the temperature captured by a 2 or 3 wire Pt100 sensor, into a proportional voltage output signal.
Temperature Converter for DIN Rail Input: Thermocouple J, K Output: 0-10V / 0/4-20mA Isolation: 2 ways 2.5kV Power Supply: 24V…
DITEL KOSETH/RS4 is a simple module that allows the connection with RS485 to Ethernet networks. By using RS485 you can connect up to 247 devices and by using Ethernet up to 10...
DITEL KOSETH/RS4 is a simple module that allows the connection with RS485 to Ethernet networks. By using RS485 you can…
Ditel KOSMUX16 Analog multiplexer for 16 0/4-20 mA inputs and one active 0/4-20mA output controlled by 4 digital inputs with a maximum multiplexing speed of 7ms per channel.
...
Ditel KOSMUX16 Analog multiplexer for 16 0/4-20 mA inputs and one active 0/4-20mA output controlled by 4 digital inputs with…
Ditel KOSMUX16A Analog Multiplexer for 16 0/4-20mA inputs and one RS485 MODBUS output controlled by a 4 digital inputs with a maximum multiplexing speed of 7ms per channel.
...
Ditel KOSMUX16A Analog Multiplexer for 16 0/4-20mA inputs and one RS485 MODBUS output controlled by a 4 digital inputs with…
Ditel KOSMUX8 Analog multiplexer for 8 0/4-20mA inputs and one active 0/4-20mA output controlled by 3 digital inputs with a maximum multiplexing speed of 7ms per channel.
&...
Ditel KOSMUX8 Analog multiplexer for 8 0/4-20mA inputs and one active 0/4-20mA output controlled by 3 digital inputs with a…
The KOSUSB unit provides a fully input/output isolated USB powered interface between a Windows computer and "DITEL KOS" line of loop configurable temperature transmitters.
...
The KOSUSB unit provides a fully input/output isolated USB powered interface between a Windows computer and "DITEL KOS" line of loop…
Installation Kit on DIN RAIL for in-head converters.
The kit ACK103 (KOS Converters) Includes:
A. 1 M4 screws to secure the support to the converter.
B. 1 Support m...
Installation Kit on DIN RAIL for in-head converters. The kit ACK103 (KOS Converters) Includes: A. 1 M4 screws to secure…
The Lumel P17 Transducer of temperature and standard signals is designed to convert the signal from temperature, resistance or voltage sensors into a 4...20 mA current signal....
The Lumel P17 Transducer of temperature and standard signals is designed to convert the signal from temperature, resistance or voltage…
The Lumel P20 Programmable transducer is designed to convert the temperature, resistance, voltage from shunt and standard signals into a standard constant-current or constant-...
The Lumel P20 Programmable transducer is designed to convert the temperature, resistance, voltage from shunt and standard signals into a…
The Lumel P21Z Programmable Transducer of a.c. current, voltage or frequency is designed with a continuous conversion of a.c. current or a.c. voltage without the constant comp...
The Lumel P21Z Programmable Transducer of a.c. current, voltage or frequency is designed with a continuous conversion of a.c. current…
The Lumel P30H Transducer of D.C. Circuit parameters with Ethernet. is a transducer which is designed for photovoltaic, battery, telecommunications and railway installations. ...
The Lumel P30H Transducer of D.C. Circuit parameters with Ethernet. is a transducer which is designed for photovoltaic, battery, telecommunications…
The Lumel P30O Transducer of pulses, frequency, turns, operation time with Ethernet. This is a programmable transducer that is designed to convert the number of pulses, number...
The Lumel P30O Transducer of pulses, frequency, turns, operation time with Ethernet. This is a programmable transducer that is designed…
The Lumel P30U transducer is designed to convert temperature, resistance, standard voltage and current signals into a standard DC voltage or DC current signal. The output sign...
The Lumel P30U transducer is designed to convert temperature, resistance, standard voltage and current signals into a standard DC voltage…
Lumel PD20 USB/RS485 Interface industrial converter.
The PD20 converter does not interfere into the structure of data transmission and is compatible with many industrial co...
Lumel PD20 USB/RS485 Interface industrial converter. The PD20 converter does not interfere into the structure of data transmission and is…
Lumel PD24 converter is designed for the conversion of USB interface into RS232 (TTL) interface with TTL voltage levels. Additionally it is the programmer for LUMEL products t...
Lumel PD24 converter is designed for the conversion of USB interface into RS232 (TTL) interface with TTL voltage levels. Additionally…
The Lumel PD52 Converter/Repeater RS285/RS232 interface is a digital device designed to convert the RS232 into an RS485 interface or the RS485 interface into an RS485 interfac...
The Lumel PD52 Converter/Repeater RS285/RS232 interface is a digital device designed to convert the RS232 into an RS485 interface or…
The Lumel S4AO modules comes with 4 analog outputs dedicated to convert digital data sent by mens of the MODBUS protocol to standard DC (Voltage or current) signals.
The Lumel S4AO modules comes with 4 analog outputs dedicated to convert digital data sent by mens of the MODBUS…
The Lumel SM1 - 2 channel Analog input module is designed to convert standard signals, resistance or temperature signals into numerical data accessible through the RS485 or RS...
The Lumel SM1 - 2 channel Analog input module is designed to convert standard signals, resistance or temperature signals into…
The Lumel SM2 Analog input module has 4-channels and is designed to convert standard signals, resistance or temperature signals into numerical data accessible through the RS48...
