P103 Linear Position Sensor

Description

The Positek P103 short stroke linear position sensor is a durable, affordable, high accuracy short stroke linear inductive position sensor designed for use in industrial and scientific applications. It is very compact and offers an excellent stroke to overall length ratio.

Like all Positek® sensors, the P103 linear position sensor provides a linear output that is proportional to the displacement. Each unit is supplied calibrated to the exact travel required by the customer, for example, if your application requires 1″ (25 mm) measurement then Positek will manufacture the sensor specifically for this length.The mechanical length and calibration will be set up for 25mm. The P103 short stroke sensor is available with any travel from 0-2mm to 0-50mm.

The overall performance, repeat-ability and stability are outstanding over a wide temperature range. The sensor has a rugged stainless steel body and plunger.

The P103 sensor is particularly easy to install with either flange housing or body clamps. The plunger can be supplied captive or free with either female M4 thread or spring loaded with dome end. The P103 is available with a wide range of electrical inputs/outputs, sealing up to IP65/IP67 dependent on connector/cable options and fully integrated EMC protection.

As a leading designer and manufacturer or linear, rotary, tilt and intrinsically safe position sensors, Positek® has the expertise to supply a sensor to suit a wide variety of applications.

Follow us on Facebook

Positek offers a range of options for its standard sensors. Each sensor is manufactured to suit each customer's preferences. If your requirement is outside the options given below, Positek can modify/ redesign a sensor to suit your specific requirement. Standard options are available as below:

Measurement Range

Factory set to any length from 0-2mm to 0-50mm in increments of 1mm. For example, if your application requires 1" (25 mm) measurement, then Positek will manufacture the sensor specifically for this length. The mechanical length and calibration will be set up for 25 mm.

Electronic Options

Output Signal	Supply Input	Option Code
Standard
0.5V to 4.5V DC ratiometric	+5V DC nom. ±0.5V	A
Buffered
0.5V-4.5V DC	+24V DC nom. +9-28V	G
±0.5V DC	±15V DC nom. ±9-28V	B
0.5-9.5V DC	+24V DC nom. +13-28V	C
±10V DC	±15V DC nom. ±13.5-28V	D
4-20mA (2 wire)	+24V DC nom. +18-28V	E
4-20mA (3 wire sink)	+24V DC nom. +13-28V	F
4-20mA (3 wire source)	+24V DC nom. +13-28V	H

Connector/Cable Options

Option	Option Code
Connector - Hirschmann GD series Axial, IP65	J
Connector - Axial IP67, M12 - 4 pin. Without trim adjustment	J + Z600
Connector - Axial IP67, M12 - 4 pin. With trim adjustment	J + Z601
Cable with M12 gland Axial, Gland, IP67	L
Cable with short gland Axial, Gland, IP67	M
Cable length - The standard length of cable supplied with a Positek position sensor is 50cm although you can specify any length you require.	Specified in cm after the L or M e.g. L200 for 200cm cable from axial cable gland

Mounting Options

Option	Option Code
Front flange mount	N
Body clamps	P

Plunger Options

Option	Option Code
Spring loaded (extended)	R
Dome end on plunger	T
Non-captive plunger (not with options "R" or "T")	V

<+/-0.1% FSO Linearity error (10mm minimum stroke length)

Option Code
Z650

Dimensions

Body Diameter	35mm
Body Length	Axial version: calibrated travel +163mm Radial version: calibrated travel: +186mm
Push Rod Outside Diameter	6mm
Travel	Any stroke from 0-2mm to 0-50mm (e.g. 25mm)
Independent Linearity	<±0.25% at 20°C <±0.1% available on request
Temperature Coefficient	<±0.01%/°C Gain & <±0.01%FS/°C Offset
Resolution	Infinite
Noise	<0.02% FSO
Frequency Response	>10KHz (-3dB); >300Hz (-3dB); 2 wire 4-20mA

Output Signal and Output Load

Output Signal	Output Load
0.5 to 4.5 V DC ratiometric	5k Ohms min
0.5 to 4.5 V DC	5k Ohms min
± 5V DC	5k Ohms min
± 10V DC	5k Ohms min
0.5 to 9.5 V DC	5k Ohms min
4 to 20mA (2 wire)	300 Ohms max at 24V
4 to 20mA (3 wire sink)	950 Ohms max at 24V
4 to 20mA (3 wire source)	300 Ohms max at 24V
Supply Current	12 mA Typical 20 mA max (voltage versions)

Temperature Limits

Operating	-40 to +125°C (5V input only) -20 to +85°C
Storage	-40 to +125°C

Other

EMC Susceptibility	EN 61000-6-2
EMC Radiated	EN 61000-6-3
Vibration	IEC 68-2-6: 10g
Shock	IEC 68-2-29: 40g
MTBF	350,000 hrs 40°C Gf
Sealing	IP65 (connector) / IP67 (cable)
Electrical Connections	Screened cable or integral connector

DATA SHEET

BODY CLAMPS

Content missing

P103 Linear Position Sensor

P101 Linear Position Sensor

B Series Accelerometers